MCRT® 49700V Series Digital Torquemeters MCRT® 49700V
These strain gage torquemeters measure and output shaft torque in analog and digital form. They are available in torque ranges from 25 to 2,000,000 lbf-in with 4X overload rating. A zero velocity speed option adds analog and digital outputs of speed and computed shaft power.
Null, scaling and units of measure are stored in non-volatile memory. There are no noisy pots or switches. Thirty three units of measure are supported without requiring recalibration. Eleven user selectable Bessel filters avoid delay distortion and overshoot errors. These models incorporate new technology that hardens them to EMI generated by IGBT based adjustable speed drives.
Included software interfaces Windows-based PC’s and displays and plots real time data. Use it to select 5V or 10V analog outputs, filters, scaling, units of measure and/or to control measurements.
Code N Performance
Code C Performance
Torque combined Nonlinearity and Hysteresis (end point, % of full scale)
±0.1
±0.05
Speed and Power (option) combined Nonlinearity and Hysteresis (end point, % of full scale)
Nonrepeatability (% full scale)
=<±0.07
±0.03
Speed
±0.01
Accuracy (% of full scale)
Torque
Power
Rotational Effect on Zero (% of full scale)
Temperature Effects:
Zero (% of full scale/deg F.)
±0.002
±0.001
Span (% of reading/deg F.)
±0.003
±0.0015
Compensated Range
+75 to +175 deg F
Minimum Usable Range
-25 to +185 deg F
Storage Range
-65 to +225 deg F
Analog Outputs, Auto-Scaled
Torque and Power
±10 or ±5 Volts dc, user selectable
+10 or +5 Volts dc, user selectable
Nominal Overrange (% of full scale)
50
Signal Filter Cutoff
0.1 to 200 Hz in eleven 1-2-5 steps, user selectable
System Resolution (% of full scale)
0.02 (14 bits with 50% overrange)
Outputs Torque, Speed (option) and Power (option) with units of measure. Inputs range selections, scaling, cal info and units of measure.
11 to 24 volts dc @ 150 mA, nominal
鲁公网安备 37020202001236号
