MCRT® 39000X Series Torque Transmitters MCRT® 39000X
MCRT® 39000X Series Torque Transmitters are available in capacities from 25 lbf-in to 2,000,000 lbf-in with overload ratings of 4X full scale. Integral signal conditioning provides true 2 Wire, loop powered, 4-20 mA operation. They will operate from a single power supply in the range of 10 to 32 volts dc (including 12 volt batteries). Hardened to EMI from variable frequency drives, they have 10 times the noise immunity of earlier models. NIST traceable dead weight calibrations are performed in our NVLAP accredited laboratory, NVLAP Lab Code 200487-0.
When installed between a driver and load, the torque transmitter will measure static and dynamic shaft torque and speed (optional). A strain gaged stainless steel shaft senses torque and cancels bending and thrust. Robust, ferrite free rotary transformers connect the gages to noise immune carrier amplifiers. They don't generate noise or wear, are immune to magnetic fields, noise, vibration, lubricants and other hostile environments.
They are available in either shaft or flanged style configurations. Shaft end torque transmitters are less costly than flanged models and can be either floated or foot mounted. Flanged models are much shorter and can be used when axial space is limited or when the highest shaft stiffness is needed.
Code N Standard Performance
Code C Enhanced Performance
Nonlinearity (% of F.S.)
=< ±0.10
=< ±0.05
Hysteresis (% of F.S.)
Nonrepeatability (% of F.S.)
=<±0.10
Accuracy (combined Nonlinearity, hysteresis and nonrepeatability, % of F.S.)
=<±0.15
=<±0.07
Stability, 6 Months (% of F.S.)
Rotational Effect on Zero (% of F.S.)
=<±0.05
=<±0.03
Calibration Accuracy (% of F.S. @ 75 deg F, traceable to NIST)
=<±0.02
Temperature Effects:
Zero (% of F.S./deg. F.)
=<±0.003
=<±0.002
Span (% of Rdg./deg. F.)
Compensated Range
+75 to +175 deg. F
Minimum Useable Range
-25 to +185 deg. F.
Storage Range
-65 to +225 deg. F.
Outputs: 4 switch selected modes as follows:
Clockwise (CW) Unidirectional Torque
4-20 mA
Counterclockwise (CCW) Unidirectional Torque
CW Bidirectional
12 ± 8 mA
CCW Bidirectional
Measurement Bandwidth:
dc to 200 Hz or dc to 1 Hz, switch selectable
Supply Voltage:
10 to 28 Volts dc fused and reverse polarity protected
魯公網安備 37020202001236號
