產品資料

變送器

如果您對該產品感興趣的話,可以 sendmsg
產品名稱: 變送器
產品型號: LCA15
產品展商: ME
產品文檔: 無相關文檔

簡單介紹

LCA15變送器 通用型稱重變送器 多種輸出模塊(電壓/電流/數字)可供選擇 輸入靈敏度范圍0.5-200mV 10V,160mA激勵,至多可驅動6只350歐姆傳感器 6線制連接用于遠距離補償 全隔離4-20mA和0-10V輸出 2個固態繼電器設定點輸出 AC/DC供電可選 數字顯示編程板 透明ABS/鑄鋁外殼可選


變送器  的詳細介紹
Inputs
LCA15變送器
通用型稱重變送器
多種輸出模塊(電壓/電流/數字)可供選擇
輸入靈敏度范圍0.5-200mV
10V,160mA激勵,至多可驅動6只350歐姆傳感器
6線制連接用于遠距離補償
全隔離4-20mA和0-10V輸出
2個固態繼電器設定點輸出
AC/DC供電可選
數字顯示編程板
透明ABS/鑄鋁外殼可選
The input is of the Load Cell/Strain Gauge type. With transducer excitation voltage of 9.6 volts @ 160mA to drive 6 x 350R bridges
Compensation by ± sense wires for cable and safety barrier losses down to 3V excitation
Load cell sensitivity is preset via DIL switches to 0.5, 0.8, 1.0 1.25, 1.5, 2.0, 2.5, 3.5, 5, 10, 20, 50, 100 or 200mV/V
Initial offset is no greater than ± 0.15mV (15uV/V) which is cancelled during auto calibration
Speed is 10 readings per second with a digital filter to reduce speed
Accuracy is 90 days ± 0.08% of reading, +/- 0.05% FSD being typical
Drift is 0.002% per degree C @ 2.5mV/V typical
Resolution 15 bit/ 4.5 digits
Contact inputs are available for auto tare, print and peak hold reset and are volt free
Analogue Outputs
Drive 4-20mA up to 1Kohm and 0-10 volts up to 2mA
Accuracy 4-20mA + 0.15% of range, typical. 0-10V ±2% before calibration
Resolution as for display up to 13 bits/4.5 digits. Settling time 350mS to within 1% of step change
Isolation ±130V RMS or DC max to analogue input or any other port
Power Supplies
LS1 110V-120V AC or 220/230V AC 50-60Hz 10W
LS3 9-32V DC 10W isolated
Data Retention/Protection
Retention 10 years for set up values, minimum of 100,000 write cycles
Protection of data and function(s) Watchdog timer giving repeat auto resets. Impending power detection and hold off. Keypad security and time out
Other Options & Accessories
2 Set Points Output through 5A 240V AC SPCO Relays, with a latching option
Communications Port For data transfer or print via :-
RS485 Enabling up to 25 units to be multi dropped
RS232 For 1 to 1 connection and standard printer drive
Printer Operation By closure of volt free contact
Baud Rates 300, 600, 1200, 2400, 4800, 9600 (19200 MANTRABUS only)
Die Cast Case Sealed to IP65 / NEMA 4 with external dimensions of 220 x 120 x 80mm max
Stainless Steel Case Sealed to IP65 / NEMA 4 with external dimensions of 224 x 160 x 90mm
PCB Only (Eurocard) (LCB) 100 x 160 X 57mm for rack or customers enclosure
Environmental
Storage Temperature -20 to +70ºC
Operating Temperature -10 to 50ºC
Relative Humidity 95% maximum non condensing
CE Environmental Approvals European EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC
產品留言
標題
聯系人
聯繫電話
內容
驗證碼
點擊換一張
注:1.可以使用快速鍵Alt+S或Ctrl+Enter發送資訊!
2.如有必要,請您留下您的詳細聯繫方式!

魯公網安備 37020202001236號